1. Test overview.
This test is an auto-test for the 120 film carrier. I.e. it only checks of correct operation. No parameter is modified and the operator action is not required.
In fact, it is not a test in itself, it does nothing but connect all the unit tests which are listed below, namely :
The simple fact of launching this test will make it possible to know if the 120 film carrier is functional, but will not allow to know if it is adjusted.
2. Conditions of the test.
This test relates to the 120 film carrier inserted in the scanner.
The 120 film carrier must be inserted in the scanner to carry out this test.
No film must be inserted in the film carrier for this test.
The acceptance of the test is automatic.
No parameter is saved.
3. Requirements.
None.
4. Realisation of the test.
Click on RUN for execute the test. The unit tests listed below will be carried out ones after the others.
Results of each test unit will appear in the execution window.
5. Acceptance of the test.
Whatever the result of the unit tests, they will all execute. I.e. that at the end of the auto-test, certain tests will accepted, other Rejected.
If all the unit tests are accepted, the auto-test will be accepted. If at least a unit test is rejected, the auto-test is rejected.
For the acceptance of each unit test, please see the corresponding assistance.
6. Other affected tests.
See the assistance corresponding to each unit test.
7. Trouble shooting.
If one of the unit tests fails :See the assistance of the corresponding test.